PNOZmulti Configurator gains user-centred enhancements Pilz is releasing version 6.0.0 of its Configurator tool for the PNOZmulti modular safety controller, with numerous enhancements and new features Pilz Automation Technology is releasing a major new version of the PNOZmulti Configurator software package for use with Operating Manual PNOZ m1p (ETH) 20878­EN­13 11 3 Safety 3.1 Intended use The configurable control system PNOZmulti is used for the safety­related interruption of safety circuits and is designed for use in:} E­STOP equipment} Safety circuits in accordance with VDE 0113 Part 1 and EN 60204­1 CAUTION! Moved Permanently. The document has moved here. - PNOZmulti I/O modules - PNOZmulti Mini communication - PNOZmulti Mini controllers - PNOZmulti Mini I/O modules ; Controller and I/O Systems - PDP67 modules - PSSdio I/O modules The PNOZmulti Configurator software is designed to configure units from the PNOZmulti modular safety system for use on E-STOP equipment and safety circuits, in accordance with EN 60204-1 (VDE 0113-1), 11/98 and IEC 60204-1, 12/97. Press applications The press elements in the PNOZmulti Configurator are designed for the control PNOZmulti Mini Base Unit, Safety Controller. The PNOZmulti Mini configurable safety relay from Pilz has an integral LCD display which provides status information and diagnostic messages. This safety controller has all the functions of the established PNOZmulti yet is only a space saving 45mm wide. Pilz is releasing a new version of the drag-and-drop Configurator for the PNOZmulti modular safety controller. This incorporates a number of improvements and enhancements over the previous version, 5.2.2, the most important of which is support for the PNOZ ma1p analogue input module that was announced recently. Data is evaluated in the PNOZmulti for further processing. The direction of rotation can be detected simultaneously. The set values are entered quite simply in the graphics configuration tool, PNO