LA002 LA026 Air sampler Fan (SS Fan Impeller, with Teflon boss (Autoclavable ) LA027 Air SS Cup SS Fan Housing Cup for handset (Autoclavable) LA024 Air sampler Unit (power pack with Batteries. (Ni- Cad) PW366 Sterile Plastic Air Sampler Strip, w/o Medium After filling desired sterile medium in the strip, It is used for air sampling. (1pk=40 strips ) It simplifies the job of microbial air sampling by applying modern data management capabilities that save time and reduce operator error in air sampling data. The MiniCapt Mobile active air sampler makes the job easier by incorporating a capacitive and sliding touchscreen, allowing easy use with gloves without the need for a stylus. Watch this video for an overview of the MiniCapt Mobile active air sampler and how it, optionally, connects with the BioCapt Single Use microbial impactor. GILAIR-3 & GILAIR-5 AIR SAMPLING SYSTEMS 16333 Bay Vista Dr. • Clearwater, Florida 33760 USA • (800) 451-9444 • (727) 530-3602 • (727) 539-0550 [FAX] • sensidyne.com REF 360-0040-01 (C) GILAIR-3 & GILAIR-5 AIR SAMPLING SYSTEMS OPERATION MANUAL WARNING 5 4 3 1 2 Battery Fault Flow Possible static hazard. Do not rub with dry cloth. Gilian® BDXII ABATEMENT AIR SAMPLING PUMP Document No. 801863M (Rev A) 3 The items listed below are shipped with the Gilian BDX II Abatement Air Sampler: • BDXII Abatement Air Sampler • Tool Kit • Tubing • Operation and Service Manual PACKING LIST ALWAYS check to make certain you have received all of the items listed above. Easy sampling: These air samplers are compact and portable, they can be attached to a tripod for adequate sampling direction. If airflow problems arise, a loud alarm goes off and sampling is aborted. A handy countdown function avoids operator interference with results. Regulatory compliance: Spin Air sampler complies with USP 797 & 1116 regulations. DQ, IQ, and OQ documentation is supplied with the device. Hazardous voltages exist behind the sampler control panel and within the sampler housing. Ensure the control panel and front and rear enclosure panels are always in place when the sampler is connected to the mains. The front doors should be closed when the sampler is left unattended. Ensure the power cord, plugs and The RADēCO RAD-Pro 5 personal air sampler (lapel sampler) is an industry leader in back-pressure performance, reliability and ease-of-use. This pump offers flow rates up to 5 LPM respectively. And thanks to several advanced features, this pump over-comes the main causes of sampling errors - saving you time and money. F&J SPECIALTY PRODUCTS, INC. is the leading North American manufacturer of traditional and microprocessor based air sampling instruments and high-tech air flow calibration systems for the nuclear power industry. Product lines include AC/DC air sampling systems for radiological emergency response and homeland security applications, personal air samplers for industrial hygiene applications and ambient high volume and low volume air samplers for the non-radiological ambient air sampling The MAS-100 Iso® NT has an additional internal pump with flow control for automatic decontamination of the sampling head and the aspiration tube. The MAS-100 Iso® NT is built according to GAMP 4 and corresponds to the ISO 14698 norm. It is a completely validated system designed for the highest demands. 1.3 Air Toxics Sampling Mode In the air toxics sampling mode the particle size separator and filter holder assembly are replaced by an adsorbent cartridge selected b