A quick look at the manual. You can also select which part of the manual is giving you a problem and then I will help you through that specific difficulty Wiring: I guess the instructions at bottom of manual apply to your model Your 240Volt hot wires from breaker box connect to terminals 1 & 5 Your two wires supplying power to heat connect to 2 & 4

Aube th132 A/F thermostat not working. Thermostat display just flashing 00:06 and therefore program/underfloor not working - have reset clock but despite working for max of 3 minutes it goes back to flashing display? Is there an easy to understand user manual for the aube TH132 AF ? Even my T410A1013 Honeywell Aube Non Programmable Thermostat - 22 amps at 120/208/240 VAC - 19 amps at 277 VAC - 2 wire SPST (0) Your Price: $13.95 T410B1004 Honeywell Line Voltage Non Programmable Thermostat - 22 amps at 120/208/240 VAC - 19 amps at 277 VAC - 4 wire DPST (0) TH115 A/F/AF 400-115-003-B 27/2/07 1/2 Aube's TH115 programmable thermostats have three temperature control modes: 1 Place the switch in Standby to cut power to the heater when not in use (e.g., in the sum-mer). This will not affect the time and temperature settings. First and foremost, an user manual of Aube Technologies TH147-P should contain: - informations concerning technical data of Aube Technologies TH147-P - name of the manufacturer and a year of construction of the Aube Technologies TH147-P item - rules of operation, control and maintenance of the Aube Technologies TH147-P item AUBE TECHNOLOGIES INC. TWO (2) YEAR LIMITED WARRANTY This product is guaranteed against workmanship defects for a two-year period following the initial date of purchase. During this period, AUBE Technologies Inc. will repair or replace, at our option and without charge, any defective product which has been used under normal conditions. TH232-AF-230 400-232-003-A 2010-01-05 3/4 sPress the to toggle between OFF and On. tPress the Mode/Return button to exit and save the