ic-9700 ci-v address
icom ci-v commands
arduino icom ci-v
ci-v transceive mode
icom ci-v programming
icom japan manualsicom 7300 ci-v address
ic-705 ci-v address

The Icom Communications Interface V (CI-V) is used for remote control These settings are set in the Set mode (Refer to the IC-705 instruction manual) . The Icom Communications Interface V (CI-V) controls the transceiver. These settings are set in the Set mode (Refer to the IC-9700 instruction manual). Also, have your radio instruction manual handy as you may need to refer to pin numbers on the accessory sockets later. Connection to the CI-V PCB Interface. Instruction Manual / Guides ID-52E, BASIC MANUAL (German/Spanish/French/Italian) MANUAL (English). ID-52A/ID-52E, CI-V REFERENCE GUIDE (English). Icom CI-V Reference Manual v3.2. 121 pages. Originally published in 2002, uploaded by Travis F · Document preview. PDF, 5.00 MB Click to download. The Icom Communications Interface V (CI-V) is used for remote control. These settings are set in Set mode (Refer to the IC-7610 instruction manual). So I started playing around with the ICOM CI-V remote control for ICOM rigs. Most older information comes from the Icom CI-V Reference Manual, 3.This reference manual explains the basic theory of the CI-V System, general operating method, and all current functions. Available functions differ according to oO ICOM ICOM COMMUNICATIONS INTERFACE-V REFERENCE MANUAL Ver 3.2-.-.- -2002- First in Communications ADDENDUM CI-V command formats for the Icom radios