- BS EN ISO 11124-1:1997 (Current) Preparation of steel substrates before application of paints and related products. Specifications for metallic blast-cleaning abrasives. Part 1: General introduction and classification. - BS EN ISO 11124-2:1997 (Current) Preparation of steel substrates before application of paints and related products. ISO 6506-1:2005, Metallic materials—Brinell hardness test, Part 1: Test method. Variations to the ISO text for Australia are set out in Appendix ZZ. Changes to the ISO text are indicated by a marginal bar. This Standard modifies ISO 6506-1 to conform with established Australian practices for hardness testing. ISO 6506-4:2014 gives a table of the Brinell hardness values for use in tests on flat surfaces. ORDER. This document is available in either Paper or PDF format. Document Number. ISO 6506-4:2014. Revision Level. 2ND EDITION. Status. Current. Publication Date. Oct. 1, 2014. Committee Number. Standards published New International Standards published between 01 March and 31 March 2014 * Available in English only ISO 6932:2014 * Cold-reduced carbon steel strip with a maximum carbon content of 0,25 % G TC 20 Aircraft and space vehicles ISO 45001 OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEMS MIGRATION GUIDE ISO 45001 OVERVIEW The occupational health and safety (OH&S) management system, ISO 45001, is a new international standard that provides a framework for an organization to manage risks and opportunities to help prevent work-related injury and ill health to workers. ISO 6892-1:2016(E) Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical ISO standard was prepared. The Adobe Systems version PDF 1.7 is the basis for this ISO 32000 edition. The specifications for P