1. Press the Menu button. 2. Press the Down button and OK button to select Alarm Limits menu. Alarm Settings include: • Pulse rate (PR) and SpO 2alarm limit ranges • SatSeconds option 3. Press the up or down button to highlight the desired option. 4. Press the OK button to select the desired option. 5. Bedside SpO2 Patient Monitoring System PM100N Service Manual Rev B Aug 2012. Cleaning, Disinfection and Sterilization Protocols Patient Monitoring Aug 2020. Clinicians Guide to Nellcor Sensors. Nellcor Intouch Service Manual sw ver 2.4.6 or lower. Nellcor N-200 Operators Manual Feb 2003. The Nellcor™ Bedside SpO 2 Patient Monitoring System, PM100N, is intended for prescription use only for continuous monitoring of functional arterial oxygen saturation and pulse rate of adult, pediatric and neonatal patients, who are well or poorly perfused, during motion and no motion conditions. It is intended to be used in hospital, hospital Operating temperature - Instrument: 5 to 40 °C; Transport/storage temperature: 20 to 60 °C. Operating humidity - 15% to 93% noncondensing. -170 to 4877 Meter Operating altitude. 82 X 155 X 255 mm Size. Accuracy - Accurately assesses patients' status with pulse oximetry measurements of ± 2 for 70% to 100% saturation, and low saturation The Nellcor™ portable SpO 2 patient monitoring system is referred to as the "monitoring system" throughout this manual. 1.2.1 Safety Symbols PM10N Table 1-1. Safety Symbol Definitions Symbol Definition WARNING Alerts users to potential serious outcomes (death, injury, or adverse events) to the patient, user, or environment. Nellcor N-550 B Service manual 8.1 MB Download Nellcor N-560 Service manual 11.5 MB Download Nellcor N-595 Service manual Page 5/11. Access Free Nellcor N 595 User Manual PM100N Operator's Manual (Eesti) Nellcor TM Bedside SpO 2 Patient Monitoring System, PM100N Operator's Manual (Suomi) Medtronic Nellcor Bedside SpO2 Patient Monitoring System - PM100N-DYS, PM100N-HC, PM100NMAXN, PM100NMAXNCC, PM100NOXIANCC Manufacturer: Covidien PM100N-MAXN - Patient Monitoring System with 24 MAX-N Neonatal/Adult SpO2 Adhesive Sensors Accurately assess p it is equipped with an audible backup alarm system so service doesn't have to end The Covidien Nellcor PM100N is a Patient Monitor with SpO2 and pulse rate monitoring features. The system can be used in a hospital setting as well as non-hospital settings, home care, and sleep studies. The Nellcor PM100N has the latest Nellcor technology system, allowing for more accurate and reliable readings. Medical Supplies & Equipment at Low Prices Medtronic - Pulse Oximeter - Nellcor PM100N Bedside Product Description Nellcor™ bedside SpO₂ patient monitoring system Technical Intended Use - Continuous monitoring Parameters - Oxygen saturation (SpO2), pulse rate (PR), Percent Modulation (% Mod) output Alarms - Audio and visual, SpO2 and PR Battery - Rechargeable Li-ion/5 hours per charge Manufacturer Item Code: PM100N-MAXN. Internal Item Number: COVIDIEN-PM100N-MAXN. Unit of Measurement: bx. Unit Volume in Cubic Inches: 4066.9. The information contained in this manual is the sole property of Covidien and may not be duplicated without permission. This manual may be revised or replaced by Covidien at any time and without notice. It is the responsibility of the reader to have the most current applicable version of this manual. The information contained in this manual is the sole property of Covidien and may not