geekworm
x735-v2 5 software
suptronics x820 v3 0
x735

➃, Push a screws (M2.5*6mm) up through the mounting hole on the underside of the X820 and screw the spacer (M2.5*12mm) down until it is hand tight. Raspberry Pi 3 Media Center Case with Geekworm/SupTronics x820 Instructions Using the following options: header = 0 header_rotation = 0 header_type hard driver hat raspberry, suptronics x820 manual, aliexpress raspberry adapter x820 pi hat unboxing, geekworm raspberry pi x820, geekworm x820 v3.0